[分享]RouterPassView 1.37 简体中文版

工具查看TP，腾达，水星，迅捷，D-LINK，华为，Linksys，华硕等主流路由配置文件用户名密码。

图片:3_15544_87bbef95bf85300.jpg

下载地址：Router Pass view

更新信息：

RouterPassView v1.37Copyright (c) 2010 – 2012 Nir SoferWeb site: http://www.nirsoft.net

Description===========
Most modern routers allow you to backup the configuration of the routerinto a file, and then restore the configuration from the file when it’sneeded.
The backup file of the router usually contains important data like yourISP user name/password, the login password of the router, and wirelessnetwork keys.If you lost one of these password/keys, but you still have a backup fileof your router configuration, RouterPassView might help you to recoveryour lost password from your router file.

System Requirements===================* This utility works on any version of Windows, starting from Windows2000 and up to Windows 7.* RouterPassView supports limited number of router models. See below.

Versions History================* Version 1.37:o Added support for HuaWei EchoLife HG520 (In Ascii Text Mode), andpossibly other routers with the same encryption.
* Version 1.36:o Added support for D-Link DIR-615 G2.
* Version 1.35:o Added support for TP-LINK TL-WR700N, advanced versions ofTL-WR340G, and probably other TP-LINK routers.
* Version 1.33:o Imporved (again) the detection of Edimax routers.
* Version 1.32:o Added support for multiple TP-LINK routers, including TL-WR841N,TL-WR841DN, TL-MR342, TL-WR340G, TL-R460, and probably other models.
* Version 1.31:o Added support for decrypting the passwords of Linksys/Cisco RV042.
* Version 1.30:o Imporved the detection of Edimax routers.
* Version 1.29:o Added ‘Open Router Web Interface’ option (Ctrl+W), which allowsyou to easily open the Web interface of your router with your defaultWeb browser.
* Version 1.28:o Added support for more NETGEAR router models.
* Version 1.27:o Added generic support (in Hex Dump mode) for router files thatare encrypted with XOR 0xff, like Thomson TG580 DSL.
* Version 1.26:o Added ‘Copy Password/Value’ option to easily copy only thepassword or wireless key into the clipboard.
* Version 1.25:o Added support for D-Link DSL-604T and other models that theirconfig file begins with LMMC signature.o Added generic support for router files that are compressed withDeflate compression algorithm. (only on Ascii and Hex Dump modes)
* Version 1.20:o Added /sascii command-line option – Save the decrypted routerfile as Ascii text file.o Added /shex command-line option – Save the decrypted router fileas hex-dump text file.o Added /sraw command-line option – Save the decrypted router fileas raw binary file.
* Version 1.16:o Added support for other versions of Edimax router file -currently only in Hex Dump mode.o When you open a file that RouterPassView can decrypt, but itcannot locate the exact passwords location, it’ll automaticallyswitch to Hex Dump mode, so you’ll be able to try locating thepassword in the decrypted Hex Dump.
* Version 1.15:o Added command-line support.o Fixed issue: Removed the wrong encoding from the xml string,which caused problems to some xml viewers.
* Version 1.10:o Added ‘Grab Password From IE Window’ option – Allows you to openthe router configuration interface in Internet Explorer, and thengrab the password stored inside the password text-box of the routerWeb page.
* Version 1.05:o Added support for D-Link DIR-300, and possibly similar models.
* Version 1.04:o Added support for Sitecom WL-351, and possibly other models.
* Version 1.03:o Fixed bug: user names of D-Link routers were wrong.
* Version 1.02:o Added support for D-Link DIR-655, and possibly other models (withgateway_settings.gws filename)o Added support for Sanex SA 5100, and possibly other models.o Fixed bug: Copy to clipboard (Ctrl+C) was disabled in text mode.
* Version 1.01:o Added support for Tomato firmware.o Added the password of ‘support’ user for D-Link DSL-2540U andpossibly other routers.
* Version 1.00 – First release.

Supported Routers=================
Due to large amount of router models available in the market, it’simpossible to support all of them.For now, RouterPassView supports a limited number of router models, andI’ll gradually add support for more routers in future versions. Also, beaware that even if your router is not in the list, you can still try toopen your router backup file with RouterPassView, because some routersare sold with different brand name, but they still use the samesoftware/chipset of other routers.
Here’s the list:* Linksys WRT54GL (With original firmware or Tomato firmware), WRT54G(only some of them), WRT160N, and possibly similar models.* Edimax BR6204WG, and possibly similar models.* Siemens ADSL SL2-141, and possibly similar models.* Dynalink RTA1025W, and possibly similar models.* NETGEAR WGT624, and possibly similar models.* ASUS WL-520g, WL-600g, and possibly similar models.* D-Link DIR-655, DIR-300, and possibly similar models.* Sanex SA 5100, and possibly similar models.* Sitecom WL-351, WL-575, WL-312, and possibly similar models.* COMTREND 536+ (Only Internet Login)* US Robotics 9108 ADSL (internet login and admin login)* D-Link DSL-2540U/BRU/D ADSL2+, DSL-2650U, DSL-520B* D-Link DVA-G3170i/PT* D-Link DSL-604T* D-Link G3670B* D-Link DSL-2640T* D-Link DSL-G684T* D-Link 2740B* D-Link DIR-615 G2* D-Link WBR-1310* TP-Link TD-8810 ADSL Modem/Router.* Dynamode R-ADSL-C4-W-G1* NetComm NB5Plus4 DSL* Thomson TG580 DSL (only in Hex Dump mode)* Asus RT-G31* HuaWei EchoLife HG520* TP-LINK TL-WR841N* TP-LINK TL-WR841DN* TP-LINK TL-MR342* TP-LINK TL-WR340G* TP-LINK TL-R460* TP-LINK TL-WR741ND v2.0* TP-LINK TL-WR700N* TP-LINK TL-WR740N* TP-LINK WA801N* Belkin N+ (F5D8236uk4)* Mercury MW54RIf you have router model that is not listed here, and you managed torecover your password with RouterPassView, please report about it tonirsofer@yahoo.com and specify the exact model name.Using RouterPassView====================
RouterPassView doesn’t require any installation process or additional DLLfiles. In order to start using it, simply run the executable file -RouterPassView.exeAfter running RouterPassView, you can open your router configuration fileby using ‘Open Router Config File’ option (Ctrl+O) or by dragging theconfig file from Explorer into the main window of RouterPassView.If RouterPassView manage to detect and decrypt your router file, youshould get a list of passwords/wireless keys in the main window ofRouterPassView. If RouterPassView cannot detect your file, it’ll remainempty.

Text Mode (Ascii and Hex Dump)==============================
If RouterPassView shows you a list of passwords, but you can’t find thepassword or other data that you need, you may try to locate your passwordby switching to Ascii Text Mode (F3) or Hex Dump Text Mode (F4).In these modes, RouterPassView decrypts the router file, but display it“as is” without analyzing the data stored in it.

How to submit a config file===========================
If you have a router config file that RouterPassView cannot decrypt andanalyze, you are welcomed to send the sample config file tonirsofer@yahoo.com, and I’ll try to figure out how to read it and addsupport for this file in future version.
You can also increase the chance of my ability to add support for yourconfig file if you follow the submission instructions below. However, beaware that it requires you to disconnect your network and internetconnection for a few minues.1. Backup your current router configuration and keep it in a safeplace on your local disk.2. Update your router configuration with dummy user names, passwords,and wireless keys. You should use very simple passwords/keys, like1111111111, 2222222222, ABABABABAB, 12345678, and so on. Putting theseeasy passwords give me a much better chance to crack the config fileand find out how the passwords are encrypted.3. Save the modified dummy configuration into a file. This file shouldbe sent to nirsofer@yahoo.com for examination.4. Restore your real router configuration from the file that you savedin the first stage.5. Send the backup file with the dummy passwords tonirsofer@yahoo.com, and specify the router model/firmware and thedummy passwords that you set in this config file.

Using the ‘Grab Password From IE Window’ option===============================================
If you try to recover your ISP/ADSL/L2TP/PPTP/PPPOE/DDNS password, butRouterPassView cannot decrypt the configuration file of your router, youstill have a chance to retrieve the password by using this feature,assuming that you have the login password of your router.
In order to use this feature, follow the instructions below.1. Login into your router Web interface with Internet Explorer, and goto the password page that you wish to recover. This password page maylook like this one:
As you can see in the above screenshot, the password field is filledwith bullets, but if this password field really contains the password,RouterPassView will be able to extract it and display it on the mainwindow.2. Go to the File menu, and choose ‘Grab Password From IE Window’ orsimply press Ctrl+G3. If the router Web page store the password in the password field,RouterPassView will display the hidden password:
Be aware that some routers deliberately store wrong password in thisfield, and in for these routers, RouterPassView won’t be able torecover your real password.

Command-Line Options====================

/RouterFile <Filename>Specifies the router file to load.
/stext <Filename>Save the list of router passwords into a regular text file.
/stab <Filename>Save the list of router passwords into a tab-delimited text file.
/scomma <Filename>Save the list of router passwords into a comma-delimited text file (csv).
/stabular <Filename>Save the list of router passwords into a tabular text file.
/shtml <Filename>Save the list of router passwords into HTML file (Horizontal).
/sverhtml <Filename>Save the list of router passwords into HTML file (Vertical).
/sxml <Filename>Save the list of router passwords into XML file.
/sascii <Filename>Save the decrypted router file as Ascii text file. (Similar to the AsciiText Mode)
/shex <Filename>Save the decrypted router file as hex-dump text file. (Similar to theHex-Dump Text Mode)
/sraw <Filename>Save the decrypted router file as raw binary file, Which means that thefile is decrypted and then saved ‘as is’ without any processing.

Translating RouterPassView to other languages=============================================
In order to translate RouterPassView to other language, follow theinstructions below:1. Run RouterPassView with /savelangfile parameter:RouterPassView.exe /savelangfileA file named RouterPassView_lng.ini will be created in the folder ofRouterPassView utility.2. Open the created language file in Notepad or in any other texteditor.3. Translate all string entries to the desired language. Optionally,you can also add your name and/or a link to your Web site.(TranslatorName and TranslatorURL values) If you add this information,it’ll be used in the ‘About’ window.4. After you finish the translation, Run RouterPassView, and alltranslated strings will be loaded from the language file.If you want to run RouterPassView without the translation, simplyrename the language file, or move it to another folder.

License=======
This utility is released as freeware. You are allowed to freely use it atyour home or in your company. However, you are not allowed to make profitfrom this software or to charge your customers for recovering theirpasswords with this software, unless you got a permission from thesoftware author.You are also allowed to freely distribute this utility via floppy disk,CD-ROM, Internet, or in any other way, as long as you don’t chargeanything for this. If you distribute this utility, you must include allfiles in the distribution package, without any modification !

Disclaimer==========
The software is provided “AS IS” without any warranty, either expressedor implied, including, but not limited to, the implied warranties ofmerchantability and fitness for a particular purpose. The author will notbe liable for any special, incidental, consequential or indirect damagesdue to loss of data or any other reason.

Feedback========
If you have any problem, suggestion, comment, or you found a bug in myutility, you can send a message to nirsofer@yahoo.com